• Multimeter Functions Available in Data List - Meter functionality has been added to the SnapList functionality. While viewing a SnapList, the F6 key will turn on/off the meter function, utilizing the measurement signal from the DLS or EDLS lead set. The meter function will appear as the first data item in the list. Available modes are Volts, Duty Cycle, Frequency, P/W (H/L), and current. If you highlight the meter parameter, the Yes/No keys will change the item.
• Ford Module Status - Ford Module Status has added UBP (UART-Based Protocol) and MSCAN (Medium Speed). *CAN VIM 2.0 required.
• Ford Powertrain - The Ford 4x4 ECU was added for MY 2002-later vehicles. It can be accessed through the Powertrain Selection. Most MY 2006 Ford vehicles are in the database.
• General Motors Powertrain & Body - MY 2005 GM Powertrain Output Controls have been updated and expanded. MY 2000-2005 GM HVAC Data & Output Controls MY 2000-2005 GM BCM Data & Output Controls
• Chrysler Powertrain - Cummins Diesel support has been added to the new database, including Output control tests. Model year support is 1999-2007, and covers all three series of the 5.9L as well as the new 6.7L for 2007. You will still need the F-00K-104-795 adapter for the MY 99-2002 vehicles. You can access a 1998 by identifying it as a 1999 in the vehicle selection screen.

• 2000 – 2004 Ford Powertrain -  Model years 2000-2004 (Non-CAN) PCM systems added to new database, including Read/Clear DTCs, SnapLists and Output Controls. Selections also allow custom user list. Output Controls like the OE tool!.
• 2000 – 2004 ABS/TCS - 2000-2004 ABS/TCS systems, including SnapList and Output controls
• 2000 – 2004 Body Systems - Updated EATC, RCM, PATS and more Body modules added, including Output Controls

Vehicle technology is changing and the Mastertech is keeping up. The new CAN VIM 2.0
enables the MTS-3100 Mastertech to communicate with 26 additional networked ECU’s
found on today’s Ford vehicles. These ECU’s are divided into 2 types of networks;

• UBP – UART Based Protocol; MSCAN – Medium Speed CAN

Note: CAN VIM 2.0 is utilized with Mastertech software release version 7.1 and later.

Ford UBP Modules
Drivers Seat Module
Vehicle Security Module
Electronic Auto Temp Control
Generic Electronic Module
4X4 Control Module
Rear Air Suspension Module
Passenger Climate Seat Module
Driver Climate Seat Module
Parking Aid Module
Liftgate / Trunk Module

Ford MSCAN Modules
Instrument Cluster
Vehicle Dynamics Module

Ford MSCAN Modules (cont’d)
Generic Electronic Module
Audio Control Module
Electronic Auto Temp Control
Parking Aid Module
Drivers Door Module
Driver Front Seat Module
Vehicle Security Module
Power Running Board
Rear Seat Entertainment Module
Audio Rear Control Unit
Liftgate / Trunk Module
Driver Climate-Control Seat Module
Satellite Digital Audio Receiver System
Digital Signal Processing Module

•  Multimeter Functions Available in Data List - Meter functionality has been added to the SnapList functionality. While viewing a SnapList, the F6 key will turn on/off the meter function, utilizing the measurement signal from the DLS or EDLS lead set. The meter function will appear as the first data item in the list. Available modes are Volts, Duty Cycle, Frequency, P/W (H/L), and current. If you highlight the meter parameter, the Yes/No keys will change the item.
• Module Status Added - Nissan DDL2 and CAN were added to Module Status function. Up to 26 ECUs can be accessed.
• Nissan Coverage - Model year coverage has been expanded to 2007, including DDL2 and CAN ECUs, Auto ID now available on ECUs that support Mode $09.
• Idle Learn - Idle Air Volume Learn and EGR position tests added to ECM controls.
• ABS Systems - ABS Systems have SnapLists and Output Controls added.
  

Software Highlights For MFT 7.2 Nissan

• Body Control Systems - New BCM ECU coverage, including Output controls. HVAC, IPDM and more Body modules added, including Output Controls
  

Software Highlights For MFT 6.2 Honda

• Multimeter Functions Available in Data List - Meter functionality has been added to the SnapList functionality. While viewing a SnapList, the F6 key will turn on/off the meter function, utilizing the measurement signal from the DLS or EDLS lead set. The meter function will appear as the first data item in the list. Available modes are Volts, Duty Cycle, Frequency, P/W (H/L), and current. If you highlight the meter parameter, the Yes/No keys will change the item.
• Auto ID - The Auto ID feature will work on a few MY04s and most MY05s. This is a function of the ECU implementation of Mode $09 VIN reporting. Manual entry is also available.
• DTC Retrieval -  There is a new Honda SnapList called DTC Status which reports the status of individual DTC tests. Please be advised that not all DTCs report in this mode, and this a function of the ECU, not the tool. We report exactly what the OEM tool does.
• Data List - The User List allows selection of custom parameters from the entire list.
• Output Controls - The ECU will report all tests, but may not support them all. If the ECU does not support the test it will report a message of NOT SUPPORTED. This is identical to the OEM tool behavior Note: MY04 Acura RL, Honda Odyssey/Pilot AT controls use a unique communication and are not implemented in this release. They can be accessed through the OE software in Limited Mode.