No. COR-A2019TI-20 - Tire Changer with SP 2000 Power Option

AWARD

"Quality Management System ISO 9001"

Its superb quality sleek design and unique features exemplify why Corghi was awarded the Quality Manufacturing and Management System ISO 9001 Award. Industrys most coveted award.

Equip with the SP 2000 Power Option, which is ideal for working with low profile tires and alloyed sports car wheels. The bead loosening is done by gradually increasing the dish pressure against the bead while rotating the tire. There is no contact between the bead loosening dish and the rim. Thus, both elements are fully protected.

INCLUDES SP2000 POWER OPTION

• Pneumatic powered upper disc, holds bead into the wheel drop for mounting
• Designed for low profile, EMT and High Performance Tires and Wheels
• Loosening upper bead for demounting
• Push down upper bead for lubrication and tire tool insertion
• Lowering upper bead for inspection between bead and demount head
• Lowering upper bead for inserting the bead clamp, this clamp makes it possible to lift the bead over the mount/demount head
• Pneumatic powered lower lifting arm holds lower bead into wheel drop while lower bead is lifted over mount/demount head
• Also re-loosens the lower bead if it re-seats
• Never requires more than one person to change the tire and no pry bars are used.

Standard Features Include:

Mount Demount Column

• Pneumatic locking mount/demount head and shaft
• Pneumatic power/tilt column
• More rigid mount/demount head providing for less flex
• Inflation gauge, with hose and bleed off valve

 Turntable

• Stainless Steel Turntable
• Air jets built in on all 4 clamping jaws
• Larger wheel clamping capacity
• Dual air powered clamping cylinders (re-build able)
• Tabletop attached to transmission by a spline shaft
• Non-flexing turntable

Bead Loosening Unit

• Patented 2 position wheel support
• Adjustable bead loosening disc.
• Wider capacity
• Stainless steel cylinders (re-build able)

 Transmission

• Permanently sealed and lubricated
• Carries a 4 year warranty

Specifications:

Tabletop clamping parameters:

Inside-out 13" to 23"

Outside-in 12" to 20"

Rim width:

2" to 15"

Maximum Tire Diameter:

37.7"

Maximum Tire Width:

15"

Bead Breaker Opening:

2" to 15"

Bead Breaking force on shoe:

3422 lbs.

Bead Breaking force at cylinder:

6033 lbs.

Rotational Torque:

120 kg

Table revolutions:

8.5 rpm

Operating Pressure:

145 psi

Power:

110V/Single Phase

Clamping with M/C adapter:

Outside-in 17" to 26"

Clamping with ATV adapter:

Outside-in 9" to 19"

SP2000 Power Option

Rim Width:

5" to 14"

Rim Diameter:

10" to 20"

Maximum Wheel Diameter:

37.7"

Bead Breaking force on roller:

700 kg @ 145 psi

Working Pressure:

145 psi

Weight:

675 lbs.

Warranty:

1 Year Parts & Labor

4 Year Transmission